Manufacturer of all types of Ferrous & Non Ferrous investment casting.
Home About Us Products Technical Data Quality FacilityInquiry Inquiry
Technical Data
Product Category
Valves, Fitting & Strainers Pump Spares Fire Fightening Equipment Automobile Parts General Engineering Parts Refrigeration & Dairy Products

Quality Certification
Quality Certification Quality Certification

Technical Data

Alloy / Materials Used


Material description ASTM Specification Grades
Low-carbon austenitic stain­less steel (carbon equal to or less than 0.03%) A 351/A 351M CF-3,CF-3A,
  CF-3M,CF-3MA,
A 743/A 743M CF-3,CF-3M,
  CF-3MN,CN-3M,
A 744/A 744M CF-3,CF-3M
Low-alloy steel (quenched and  tempered) A 148/A 148M 105-85,115-95,
  135-125,150-135,
  160-145,165-150,
  165-150L,210-180,
  210-180L,
  260-210,260-210L
A 352/A 352M LC2-1,LC1,LC2,
  LC3,LC4,LC9,
A 732/A 732M    7Q,8Q,9Q,10Q,11Q,
   12Q,13Q,14Q.
Carbon Steel (carbon less than 0.35% tensile strength less than or equal to 70 ksi (480 Mpa)) A 27/A 27M      All Grades
A 216/A 216M WCA,WCB
A 352/A 352M LCB,LCA
A 356/A 356M 1
A 732/A 732M 1A,2A
Low-alloy steel (annealed,normalised or normalised and tempered. Tensile strength less than 85 ksi (585 Mpa)) A 148/A 148M 80-50
A 217/A 217M WC1,WC4,WC5,WC6,
  WC9
A 352/A 352M LC1,LC2LC3,LC4
A 356/A 356M 2,5,6,8
A 389/A 389M C23,C24
Carbon steel (tensile strength greater than 70 ksi (480 Mpa)). Carbon-manganese  steel (tensile strength equal to or greater than 70 ksi but less than 90 ksi (620 Mpa))  A 148/A 148M 80-40
A 216/A 216M WCC
A 352/A 352M LCC
A 732/A 732M 2Q,3A
A 757/A 757M A2Q
Carbon and carbon-manganese steel (tensile strength equal to or greater than 90 ksi (620 Mpa)) A 732/A 732M 3Q,4A,4Q,5N
Low-alloy steel (annealed, normalised or normalised and tempered. Tensile strength equal to or greater than 85ksi (585 Mpa)). A 148/A 148M 90-60,105-85
A 217/A 217M C5,C12,WC11
A 356/A 356M 9,10
Ferritic Stainless steel A 743/A 743M  CB-30,CC-50
Martensitic Stainless steel  A 217/A 217M  CA-15
A 352/A 352M CA6NM
A 356/A 356M CA6NM
A 487/A 487M CA15-A,CA15-B,
  CA15-C,CA15-D,
  CA15M-A,CA6NM-A,
  CA6NM-B
A 743/A 743M  CA-15,CA-15M,
  CA6NM,CA-40,
  CA6N
Unstabilised austenitic Stainless Steel (Carbon greater than 0.03%)   A 351/A 351M  CF-8,CF-8A,
  CF-8M,CF-10,
  CF-10M,CG-8M,
  CH-8,CH-10,
  CH-20
A 447/A 447M Type 1
A 743/A 743M CF-8,CG-12,
  CF-20,CF-8M,
  CF-16F,CH-20,
  CG-8M,CE-30
 A 744/A 744M CF-8,CF-8M
  CG-8M
Stabilised austenitic stainless steel A 351/A 351M CF-8C,CF-10MC,
  CK-20,HK-30
  HK-40,HT-30,
  CN-7M,CT-15C
A 447/A 447M Type II
A 743/A 743M CF-8C,CN-7M,
  CN-7MS,CK-20
 A 744/A 744M CF-8C,CN-7M,
  CN-7MS
Austenitic-ferritic  stainless steel A 351/A 351M CD-4MCU
A 743/A 743M CD-4MCU
A 744/A 744M   CD-4MCU
Precipitation-hardened austenitic stainless steel A 747/A 747M CB7CU-1,CB7CU-2

Nickel-base alloys

A 494/A 494M

CW-12MW,CY-40,

CZ-100,M-35-1,

M-35-2,M-30C,

N-12MV,N-7M,

CW-6M,CW-6MC,

CW-2M,CX-2MW


Other than above, in general, we can cast any material  compositions as per customer specification meeting to any of the standards of EN, GHOST, DIN, JIS, UNI or ASTM etc.
Technical Data
Introduction Process Advantages of IC Rapid Prototyping Alloy / Materials Used Tolerances
Home Contact Us Sitemap