Quality Manufacturer of all type of
Why Investment Casting
Greater Design freedom
Feasibility of replacing two or more fabricated sub-assembling by a single piece casting.
Lighter, Stronger components may be designed, without a mismatch, giving an improved aesthetic appearance.
The process permits a high level of consistency, batch to batch.
Compared to other conventional way of manufacturing castings, with lost wax process close dimensional tolerance of ±0.13mm per 25mm and a fine smooth grain finished from 80 to 120 micron inches, 2.0µ to 3.2µ , are normally achieved.
The light stressed wax impression dies have a very long life and are not costly considering design complexity.
Increased productivity can result from reduction or elimination of machining.
Delivery period for repeat orders in large or small quantities can be 3- 4 weeks.
Comparatively small orders can be produced at economical prices.
A high level of metallurgical integrity and Strength can be achieved in the lost wax process.
Weight Range:- 0.050 KG to 350.00 KG weight per piece.
All types of Casing, Impeller, Bowl, Diffuser, Open type & close type impellers, front & rear bearing housing.
All kind of Pump spares like centrifugal pumps, horizontal & vertical pumps conned motor pumps.